MSDS

Health & Safety - WB Acrylic CSI 430
Water Based Acrylic Sealant

2. Composition/Information or Ingredients
Substance: Isothazolin
Classification: Xi
Risk: R36/R43
WGT: >0.1 <1.0%
(R36) Irritating to eyes
(R43) May cause sensitization by skin contact

3. Hazards Identification
Potential Health Effects:
Ingestion:
Skin Contact: Uncured product may cause slight irritation
Inhalation:
Eye contact: Uncured product contact may cause slight irritation.

4. First Aid Measures
Ingestion: Rinse mouth with water several times immediately. Do not induce vomiting. Dilute with water or milk, seek medical advice if discomfort arises or persists.
Skin Contact: To clean from skin, remove completely before washing with soap and water.
Inhalation: Move person to fresh air.
Eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and seek medical attention if irritation persists.

5. Fire-fighting Measures
Extinguishing Media: All standard firefighting media.
Special firefighting procedures: None known.
Firefighting PPE: Use respiratory protector.

7. Handling and Storage
Precautions to be taken in handling and storage: Keep container closed when not in use. Avoid contact with skin and eyes. Store in dry and cool place. Do not store above 30°C. Do not store below 5°C. Keep out of reach of children.

8. Exposure Controls/Personal Protection
Exposure Controls/Personal Protection
Engineering controls: Eyewash stations. Use in a well-ventilated area.
Respiratory Protection: Use in a well-ventilated area.
Protective Gloves:
Eye & Face Protection: Safety glasses.
Other Protective Equipment: None known
Ventilation:

9. Physical and Chemical Properties
Physical and Chemical Properties
Physical State: Paste
Odour: None
Colour: Various
pH: 7.8-8.3
Flash point: None
Specific Gravity (Water=1): 1.620-1.660
Density (kg/m3): 1620-1660
Solubility in water (20°C): Miscible
Explosion limits in air-lower (%): -/-
Explosion limits in air-higher (%): -/-

10. Stability and reactivity
Hazardous thermal decomposition/combustion products:
If stored and handled in accordance with standard industrial practices no hazardous reactions are known.

12.Ecological Information
Ecotoxicological information: No data at this time. Do not allow to enter drains, sewers or water courses. Do not deposit where it can affect ground or surface waters. This product is miscible in water and is thus likely to be transported with considerable distances if allowed ingress to water. The polymer is poorly biodegradable, but is not susceptible to bio accumulation. The biological oxygen demand or other components may be harmful to aquatic organisms.

13. Disposal Considerations
Disposal Method Material: Dispose in accordance with local regulations by incinerator.
Disposal Method Packaging: Dispose in accordance with local regulations. Clean containers may be recycled.

14. Transport Information
UN/NA Number: No regulations apply
IMO IMDG-code: No regulations apply
ADR (ECE): No regulations apply
RAR (IATA): No regulations apply
Air Mail/Land Express: Permitted

15.Regulatory Information
This product is not subject to the labelling requirments of EC Directives 67/548/EEC and 88/379/EC as amended.

16. Other Information
These data sheets are offered in good faith as typical values and not as product specification. No warranty, either expressed or implied is made. The recommended handling procedures are believed to be generally applicable. However, each user should review these recommendations in the specific content of the intended use. If any further information is required please contact Sealants International.

MSDS WB1
ISSUE 01
REF PC
REVISED 03.01.98
PAGE 1 of 1

HOME | STOCK PRODUCTS | SEALANT SERVICES | SITE MAP
ANCILLARY PRODUCTS | CONTACT | LOCATION | MSDS

Website of Sealants International ©2004